Главный специалист по строительному проектированию

Описание

Resume updated 19 July 2025 at 19:05

Akhmetuly Bolatbek
Male, 47 years, born on 16 January 1978

+7 (771) 6926892 — preferred means of communication
hawk20062006@gmail.com

Reside in: Astana
Citizenship: Kazakhstan, work permi t at: Kazakhstan
Ready to relocate, ready for business trips
Desired position and salary
Mechanical Engineer
Specializations:
— Procurement manager
— Chief operating officer (COO)
— Logistics department manager
— Maintenance engineer, mechanic
— Chief technical officer (CTO)

Employment: full time
Work schedule: full day
travel time to work: any


Work experience — 25 years 11 months
November 2024 —
July 2025
9 months

Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Lead Engineer Planner for major repairs
Execution of all stages of standard business processes of stop repair:
- Stage 1 - development of long -term plans;
- Stage 2 - formation of the scope of work;
- Stage 3 - detailed planning, optimization of the plan and development of
measures to ensure repairs;
- Stage 4 - finalizing: building an operational rhythm and performing a
QMS before repairs;
- Stage 5 - perfo rming stop repairs;
- Stage 6 - completion of the stop repair.
- Throughout the entire cycle of development, preparation and execution

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
of work on the shutdown.:
- Repair planning engineer;
- with engineers from the Department for ensuring the reliability a nd
mechanical integrity of production assets and equipment;
- with employees of the Department of Logistics and equipment
configuration to regularly updаtеinformation on supplies of materials and
spare parts;
- with the engineers of the department for the reconstruction of production
assets (new or basic inspections of plant facilities);
- with leading mechanical engineers/mechanical engineers of
technological production facilities ;
- with operational coordinators and pre -production engineers (shutdowns,
start -up operations, equipment cleaning, catalyst replacement, etc.).
- Formation of requirements for the conclusion of contracts with
organizations and companies in the field of trade and development.
- Implementation of recommendations, regulations and i nstructions in the
field of labor protection.
- Creation of a list of tasks (repair maps) in the IBM Maximo TORO
management system.
- Drawing up a list of defects for repaired production equipment.
- Control of the activities of the production staff in ter ms of compliance
with the rules of technical operation and maintenance of equipment.
- Participation in the implementation of advanced technologies, highly
efficient repair devices, and the mechanization of labor -intensive
processes.
- Control over ensurin g the planned consumption of materials intended for
the repair of production equipment.
- Write -off of materials according to cost items (maintenance,
maintenance, overhaul, modernization) according to the consumption
standards.
- Planning and performing w ork on equipment at production sites based
on notifications from production sites, relevant departments, and
contractors performing maintenance work.
- Approval of equipment installation orders for obtaining project
documentation.
- Ensuring the safe opera tion and repair of technological pipelines,
communications, fittings and other equipment assigned to technological
divisions. Carry out preventive work to ensure compliance with the rules
of occupational safety and health, gas, fire and industrial safety.
- Quality control of work during construction, installation and repair work
at production facilities and their compliance with design estimates or
defect reports.
- Participation in the acceptance and inspection of equipment and

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
pipelines. Taking measures to eliminate the identified deficiencies.
August 2024 —
November 2024
4 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Chief Mechanic
- Physical asset management (technological equipment, machinery,
inventory and real estate);
- Ensuring uninterrupted and technically correct operation and reliable
operation of equipment and mechanisms of the refinery;
- Responsible for the smooth operation of the entire service and control
over all processes at the refinery;
- Organization of work on equipment accounting, preparation and
registration of technical and accounting documentation at the refinery;
- Provides scheduled preventive maintenance of equipment,
technological inspection of apparatuses, lifting mechanisms and
pipelines, revision of safety devices and devices;
- Management of the company's repair service;
- Supervising the development of regulatory materials for the repair of
equipment, the consumption of materials for repair and maintenance
needs, the analysis of indicators of its use, the preparation of estimates
for repairs, the registration of applications for the purchase of materials
and spare parts necessary for the o peration of equipment;
- Organization of inter -repair services, timely and high -quality repairs and
modernization of equipment, work to improve its reliability and durability;
- Organization of technical supervision of the condition, maintenance,
repair of buildings and structures, ensuring the rational use of materials
for repair work;
- Ensuring uninterrupted and technically correct operation and reliable
operation of the equipment, as well as increasing its shift capacity,
maintenance in working conditio n at the required level of accuracy;
- Organization of the development of plans (schedules) for inspections,
tests and preventive repairs of equipment, guided by the provision of the
Unified System of Scheduled Preventive Maintenance, approves these
plans, monitors their implementation, and ensures the technical
preparation of production;
- Coordination of plans (schedules) with contractors involved in carrying
out repairs, contributes to the timely provision of necessary technical
documentation, participat es in the preparation of title lists for major
repairs;
- Ensuring the organization of specialized repairs at the enterprise, the
neutralized manufacture of spare parts, components and replacement
equipment;

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
- Participation in the preparation of proposals for certification,
rationalization, accounting and planning of workplaces, modernization of
equipment, reconstruction, technical re -equipment of the enterprise, the
introduction of means of complex mechanization and automation of
technological processes, e nvironmental protection, in the development of
plans to improve production efficiency;
- Participation in experimental, commissioning and other work on the
introduction and development of new technology, in equipment testing, in
the acceptance of new and o ut-of -repair equipment, reconstructed
buildings and structures;
- Participation in the study of the causes of increased wear and tear of
equipment, its downtime, accident investigation, development and
implementation of measures to eliminate and prevent th em;
- Leadership in the development and implementation of measures to
rеplасе inefficient equipment with high -performance ones, to reduce
unplanned repairs and downtime of equipment, to reduce repair and
maintenance costs based on the use of new progressiv e methods of
repair and restoration of parts, assemblies and mechanisms;
- Ensuring quality control over the installation of equipment, the rational
use of funds for major repairs, the correct storage of equipment in
warehouses, the timely inspection and p resentation of lifting mechanisms
and other facilities to state technical supervision authorities,
and amendments to equipment passports;
- Management of employees of the department and departments that are
engaged in the repair of equipment, buildings and structures of the
enterprise, organizes work aimed at improving their skills.
- Ensuring compliance with occupational health and safety regulations
during repair work;
- Participation in the development and implementation of measures to
create safe and fa vorable working conditions during the operation and
repair of equipment;
- Participated in the Council of Chief Mechanics of Oil Refining and
Petrochemical Enterprises in Russia and the CIS countries. (It examines
the issues of maintenance and repair of e quipment at enterprises that
ensure the reliability and safety of production, improve regulatory
documentation, develop an information base and introduce new
technologies that unite the chief mechanics of various industrial
enterprises in Russia and the CI S.
December 2023 —
August 2024
9 months


Атырауский нефтеперерабатывающий завод
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Lead Engineer Planner for major repairs
- Organization and control of major production repairs.

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
- Formation of requirements for concluding contracts with organizations
and companies in the field of maintenance and repair of equipment. .
- Implementation o f recommendations, regulations and instructions in the
field of maintenance and repair of equipment.
- Creation of a list of tasks (repair maps) in the IBM Maximo Maintenance
and equipment repair management system.
- Drawing up a list of defects for repair ed production equipment.
- Control over ensuring the planned consumption of materials intended for
the repair of production equipment.
- Planning and performing work on equipment at production sites based
on notifications from production sites, relevant de partments, and
contractors performing maintenance and repair of equipment.
- Approval of equipment installation orders for obtaining project
documentation.
- Quality control of work during construction, installation and repair work
at production facilities and their compliance with design estimates or
defect reports.
October 2023 —
December 2023
3 months


ТОО "Kazakh Construction Group"

Chief Mechanic of the Technology Department
- accepting the working documentation from the Designer, checking the
completeness, making suggestions and comments on the working
documentation and tracking the elimination of comments;
- checking for compliance of technological equipment, materials and
pipelines, lubricants, spare parts;
- making changes to the technical documentation in connection with the
adjustment of the description of technological processes in the project;
- setting optimal parameters in the specification at all stages of
manufactur ing and supply of equipment and materials, conditions of
storage and shipment of finished products, acceptance and storage of
equipment and materials;
- making adjustments to the specification of equipment and materials in
order to optimize it;
- monitorin g the fulfillment of scheduled tasks for the supply of equipment,
construction and installation work on time.;
- organization of repair service at the enterprise;
- the procedure and methods of planning the operation of equipment and
repair work;
- the sys tem of scheduled preventive maintenance and rational operation
of technological equipment;
- normative, methodological and other materials on the organization of
the manufacture and repair of equipment;
- production facilities, technical characteristics, d esign features, purpose

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
and operating modes of the enterprise's equipment, rules of its operation;
- methods of installation and repair of equipment, organization and
technology of repair work;
- advanced domestic and foreign experience in manufacturing an d
maintenance of equipment in enterprises;
- control and procedure for compiling defect reports, passports, albums of
spare parts drawings, equipment operating instructions and other
technical documentation;
- rules for acceptance and delivery of equipment after repair;
- control and preparation of applications for the purchase of equipment,
devices, materials, spare parts necessary to ensure the completeness of
the units;
- control over the work of manufacturing plants, supp liers, contractors,
licensors for the Kashagan Integrated Gas Processing Unit project within
the competence of the Department;
- participation in the development of contracts for the supply of equipment
and materials;
- participation in the work and as par t of working commissions for the
comprehensive verification of the facility's readiness for acceptance by
the State Acceptance Commission and in the preparation of necessary
documents for completed and ready -for -use facilities;
- organization of work to el iminate comments and instructions from
government oversight bodies;
- monitoring and participation in the commissioning and preparation for
the commissioning of the facility.
June 2023 —
October 2023
5 months


ТОО "GPC Investment"

Head of the Capital Construction Department
- Management of work on improving the organization of labor in
construction, reducing costs and improving the quality of construction
work, reducing their time, improving and reducing the cost of design and
surve y work.
- Providing the construction process with permits and design
documentation.
- Organization and coordination of obtaining a building permit at the
appropriate level.
- Control over the timing of the design and construction of facilities for
integra ted gas processing.
- Coordination of engineering and design solutions for construction
projects.
- Management of the supply of construction materials and equipment.
- Organization of construction work and quality control.
- Coordination of cooperation wit h subcontractors.

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
- Monitoring compliance with technology and execution of the
construction schedule.
- Conducting control and operational meetings of construction
participants.
January 2023 —
April 2023
4 months


Kazakhstan Petrochemical Industries Inc
Atyrau
Construction, Real Estate, Architecture
• Commercial Property Construction (Retail Spaces, Office Buildings)
Head of the Executive Documentation and Equipment Acceptance
Service
- Ensuring the verification of the executive and technical documentatio n
(drawn up during the construction process and recording the process of
construction and installation work, as well as the technical condition of the
facility);
- Ensuring monitoring of timely reporting by the Contractor;
- Holding working meetings with c ontractors to ensure the performance of
work;
- Signing and sending reporting and informative materials to the
appropriate authorities;
- Interaction with state authorities and other government agencies on all
issues within the competence of the Service, p roceeding from its tasks
and functional responsibilities;
- Organization and participation in commissions for the acceptance of
completed facilities and commissioning of facilities.
December 2019 —
January 2023
3 years 2 months


Kazakhstan Petrochemical Industries Inc
Atyrau
Construction, Real Estate, Architecture
• Commercial Property Construction (Retail Spaces, Office Buildings)
Director of the Department for Construction Control and Permits
- Design -related skills (working wit h drawings, 3D modeling, visualization,
etc.);
- Work with regulatory documentation and standards;
- pre -supervision and correction of FEED, pre -project documentation
(Front End Engineering Design);
- consideration of the description in the main technical solutions, cost
determination, optional separation in the detailed development of project
documentation and project deadlines, including text and graphic materials
describing all aspects of construction, including archite ctural,
technological, structural and engineering solutions (electricity, water,
heating, ventilation, etc.), as well as cost estimates;
- Verification and control of the receipt of Working documentation
(detailed drawings, plans, sections, specifications of materials, equipment
and products necessary for the timely production of work).
- The practical purpose of the specification of materials and equipment for

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
direct use by builders on the site, for ordering materials and equipment,
as well as for monitor ing the performance of work.
- Control over the development of Working Documentation in accordance
with state standards, building codes and regulations;
- Ensuring the proper execution of construction work (to avoid mistakes
and alterations on the constru ction site, optimize the procurement of
materials and equipment, and compile executive documentation).
- Team approach and participation in HAZOP (Hazard and Operability
Study) in the field of design, operation and safety, with an analysis of
potential haz ards.
- Timely identification of causes and consequences, identified deviations,
analysis of causes and potential consequences for people, equipment,
the environment and production.
- Development of risk mitigation measures based on the results of the
HA ZOP analysis, development of recommendations for risk mitigation
with changes in design, procedures, controls or personnel training;
- Participation in the creation of 3D modeling in the project, allowing you
to visualize, analyze, manage the project and i nteract with the object in
three dimensions to reduce risks, improve the quality of work, save
resources, reduce and optimize manufacturing and testing costs;
- Teamwork on project adaptation, and participation in the process of
making changes to an existi ng project in order to meet the specific
conditions and requirements of the SNIP, GOST, etc. according to the
customer's wishes (linking the project to the adjustment of the foundation,
wall and roof structures, taking into account geological and climatic
conditions, as well as making changes to the layout and design).
- Teamwork in the "Technical Solutions" (TX) "Tech required" section of
the project documentation, including a set of measures to optimize,
coordinate and organize technological processes, as well as engineering
and design solutions in order to ensure the functionality, convenience and
safety of the facility, as well as its compliance with operational
requirements;
Resource management:
- Efficient allocation and use of human, financial and mat erial resources;
Planning and timing control:
- Drawing up a realistic work schedule and following it;
- Cost control and provision of project financing.
Team coordination:
- Organization of the team's work, assignment of tasks, performance
monitoring a nd motivation.
Interaction with stakeholders:
- Effective communication with contractors, copyright and technical
supervision, experts and other project participants.
Problem solving:

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
- Identify and solve problems that arise during the project, minimizing
negative consequences.
Risk assessment:
- Forecasting and assessment of potential risks, development of
measures to reduce them.
Documentation:
- Maintaining the necessary documentation, including project plans,
reports, specifications and other documen ts.
Adapting to changes:
- The ability to flexibly respond to changes in requirements,
circumstances and adjust the project plan.
- Organization and control of the start and progress of work, verification of
permits (whether the developer has a license to carry out design work, a
CMP license, a letter of access, a construction permit, a state
examination of compliance with design documentation and engineering
survey results with established requirements and standards conducted by
authorized government agen cies, compliance with legislation, safety
requirements, reliability and environmental standards, as well as the
validity of the decisions and calculations made).
- Organization of the development of current construction plans for the
project "Construction of an integrated gas chemical complex in Atyrau
region".
- Monitoring the timing and quality of all construction, installation and
other construction work, for their compliance with approved design
estimates, building codes, rules, standards and specifica tions for the
commissioning of facilities within the time limits specified by the contract.
- Holding working meetings with contractors to ensure the performance of
general construction work according to construction plans.
- Ensuring the verification of a cts of completed works;
- Organization of work to monitor the compliance of work volumes with
design and estimate documentation;
- Control over the performance of the construction organization's work
and contractual obligations;
- Organization of works on technical inspection of pressure vessels, hot
water boilers, heat recovery boilers, technological pipelines,
lifting mechanisms with the participation of technical supervision and
state inspectors of the Emergency Situations Ministry of the Republic of
Kaz akhstan;
- Organization and control of preparation and transfer of executive and
technical documentation of construction;
- Organization of paperwork for the commissioning and commissioning of
facilities.
January 2019 —
December 2019 Kazakhstan P etrochemical Industries Inc

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
1 year

Atyrau
Construction, Real Estate, Architecture
• Commercial Property Construction (Retail Spaces, Office Buildings)
Director of the Department of Equipment and Logistics
- Coordination of activities related to Project procuremen t, logistics, and
local content;
- Monitoring the market of producers of goods, works and services for
participation in the Project;
- Forming a list of suppliers and monitoring the execution schedule;
- Carrying out pre -qualification procedures from the l ist of domestic
suppliers of TRU;
- Interaction with the general contractor, providing on an ongoing basis an
updated list of suppliers of TRU who have passed the prequalification;
- Increasing the share of Kazakhstani content by maximizing the
involvement of domestic labor suppliers;
- Interaction with government agencies, provision of reports on the share
of Kazakhstani content in the Project;
- Development and approval, together with the general contractor, of
procedures for the procurement of materials and equipment, works and
services for the implementation of the Project, participation in the
development of a procurement plan;
Coordination of interaction between domestic suppliers of TRU and the
general contractor;
- Monitoring and control of the gener al contractor's purchase of materials
and equipment, design and construction and installation works and
services, in accordance with established procedures;
- Assistance in attracting innovative technologies by placing orders for
high -tech equipment;
- Par ticipation in organizational meetings ("Kick -off meetings" and
"Pre -inspection meetings"), working meetings with the General Contractor
and Subcontractors of the Partnership in order to discuss issues of
project procurement and logistics and execution of t he delivery schedule;
- Coordination of inspections and audits of the manufacture of equipment,
goods, works and services provided by the general contractor and/or
subcontractors;
- Monitoring compliance with the delivery schedule, including, if
necessary, participation in meetings held at manufacturers of materials
and equipment;
- Review and evaluation of opportunities to attract new local suppliers of
goods, works and services for the construction of facilities of the gas
chemical complex;
- Control of t he delivery of equipment and materials, forwarding and
intermediate inspection processes, customs clearance;
- Control of the development and coordination of transportation routes

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
together with Contractors.
September 2018 —
January 2019
5 months


Kazakhs tan Petrochemical Industries Inc
Atyrau
Construction, Real Estate, Architecture
• Commercial Property Construction (Retail Spaces, Office Buildings)
Senior Engineer of the Department of Equipment and Logistics
- Interaction with the General Contractor on t he purchase of long -term
equipment, process equipment, instrumentation and control systems,
automated process control systems, electrical equipment, pipe products,
shut -off valves, fittings, flanges, fasteners, building materials, laboratory
equipment, che micals, catalysts, lubricating oils, etc. (hereinafter referred
to as Equipment and materials) at all stages of the Project
implementation:
- Compilation and coordination of the general list of suppliers;
- Pre -qualification of suppliers;
- Selection of po tential suppliers (short list);
- Participation in the organization of tenders, ITB, RFQ;
- Participation in the procedures for opening tenders, as well as their
technical and commercial evaluation;
- Inspection of equipment at manufacturing plants in the near and far
abroad;
- Monitoring, analysis and research of prices and pricing for materials and
equipment, works and services necessary for the implementation of the
Project;
- Visits to the technological and production sites of local and international
su ppliers of TRU for the purpose of inspections, technical audits and
acceptance of Equipment and materials;
- Conducting input control of incoming equipment for the Project.
July 2018 —
September 2018
3 months


Kazakhstan Petrochemical Industries Inc
Atyr au
Construction, Real Estate, Architecture
• Commercial Property Construction (Retail Spaces, Office Buildings)
Senior Engineer of the Department of Mechanics and Pipelines
- Pre -design study, development of Project stages and Working
documentation, tender documentation;
- Passing and supporting the Examination of projects;
- Periodic author supervision;
- Design of pipeline systems, and development of equipment layouts for
the Project;
- Selection of world -class equipment manufacturers based on opera tional
experience;
- Preparation and approval of questionnaires.

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
May 2018 — July
2018
3 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Senior Engineer (planner for major repairs) of the TORO Department
- Management of general capital repair plans in accordance with the
approved Schedules of the PPR (preventive maintenance plan) of
technological installations;
– Critical path analysis;
– Participate in meetings of Working Groups, Repair Headquarters;
– Maintaining communication with other oil refinery planners of the
Republic of Kazakhstan and the CIS on the team for effective progress in
planni ng and management.
July 2015 — May
2018
2 years 11 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Senior mechanic of the produc tion of the Deep Oil Refining Complex
– Quality control of installation work of equipment and pipelines;
– Participation in pre -commissioning and commissioning works,
operational warranty tests of technological installations of the Complex;
– Monitoring th e timely briefing and training of personnel on safe working
methods, monitoring compliance with their requirements, rules and
instructions on occupational safety and health;
– Control over the preparation and conduct of a technical inspection of
apparatuse s, lifting mechanisms and pipelines, and an audit of safety
devices and fixtures.
- Preparation of technological facilities for current and medium repairs.
May 2013 — July
2015
2 years 3 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Deputy Director of the Department for Quality Control of Installation works
of РХ and FCC for Mechanics
- Organization of technical supervision over the quality of installation work
on equipment and materials;
- Compliance with design decisions, SNIP, GOST, technical
specifications.

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
- Participation in the development of measures aimed at improving the
qualit y of installation work, saving and saving material resources.
- Control and timely submission of claims to contractors for defects during
installation work;
- Management and coordination of the department's work.
August 2012 —
May 2013
10 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Deputy Director of the Department for the Construction of the Deep Oil
Refining Complex for Installation work
- Organization of technical supervision of the quality of installation and
dismantling works;
- Compliance with design decisions in accordance with approved design
estimates, building codes, rules and specifications;
- Preparation of tender documentation;
- Acceptance of completed facilities or stages according to the act of
technical readiness with the execution of the act and quality assessment.
October 2011 —
August 2012
11 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Chief Specialist in Mechanics of the De partment for the Construction of
the Deep Oil Refining Complex
- Preparation and approval of technical Applications of the EPC Contract
for the construction of a Deep Oil Refining Complex with a Consortium
(SINOPEC Engineering Group, Marubeni, KazStroyServ ice);
- Conducting marketing research on the review and selection of
Manufacturers of technological equipment;
- Monitoring of construction sites and the CMP recording the production
process, as well as the technical condition of the facility.
August 2010 —
October 2011
1 year 3 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Chief Mechani cs Specialist of the Construction Department for the project
of the Complex for the Production of Aromatic Hydrocarbons (KPA) of the
Capital Construction and Reconstruction
Department – Control of the supply and configuration of equipment and

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
materials;
– Analysis of schedules for placing orders, manufacturing, deliveries,
acceptance from suppliers and their transfer to installation;
– Control of schedules for placing orders, manufacturing, deliveries,
acceptance from suppliers and their transfer to install ation;
– Participation of technical specialists of the Contractor in the acceptance
(including step –by –step - in the manufacture) of equipment and materials;
– Conducting entrance control of equipment and materials with the
preparation of certificates;
– Carrying out inspections during the manufacture of equipment at
manufacturing plants (Europe, Asia, USA);
- control of the accompanying documentation.
February 2009 —
August 2010
1 year 7 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Chief Mechanics Specialist of the Petrochemical Project Management
Department of the Complex for the production of Benzene and Aromatic
Hydrocarbons
– Preparation and approval of technical Applications of the EPC Contract
for the construction of the Complex with the Consortium;
- Confirmation of the monthly volumes of construction and installation
work performed by the Contractor, etc.
- Technical inspection of technical devices with the participation of state
supervisory authorities in the field of emergency situations and safety.
- Preparation of materials and verification of FEED (KazGiproNefteTrans,
Omskneftekhimproekt).
August 2007 —
February 2009
1 year 7 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Equipment Specialist of the Petrochemical Project Management
Department
– Interaction with the plant's services, development and provision of initial
data to the design institute for the implementation of petrochemical
projects;
– Analysis and review of working documentation, preparation of
conclusions and correspondence based on the results of the review;
– Organizing and conducting negotiations with Project participants at the
local, national and international levels.

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
March 2006 —
August 2007
1 year 6 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Mechanical engineer of the PPR (planning and preventive maintenance)
Production of oil refining and deep desulfurization
- Interaction with other operational, supervisory, emergency and
economic services of the plant;
- Provision of preparation and preventive maintenance of tec hnological
installations, technological equipment, replacement of worn –out pipelines,
mechanical inspection of technological equipment and devices, in
accordance with the current Rules in the territory of the Republic of
Kazakhstan;
- Consideration and pro cessing of applications for the purchase of
equipment and materials for import (chemicals, devices, lubricating oils,
spare parts, etc.) for technological installations of the plant.
January 2005 —
March 2006
1 year 3 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Mechanic of the hydrogen production and purification plant PPNGO
- Partici pation in pre -commissioning and commissioning works,
operational warranty tests;
- Preparation and repair of equipment, replacement of worn pipelines,
lifting mechanisms and pipelines, revision of safety devices and fixtures;
- Preparation of the "Check li st" for the LNR and the NDP;
- Control of all types of repairs carried out at installations by the
workshop's repair service, repair, installation and construction
management and contractors;
- Compilation of defective statements for major repairs of techn ological
installations.
November 2003 —
January 2005
1 year 3 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
The leading engineer for rotating equipment of the Directorate of the
enterprise under construction
- Designing pumps according to API (American Petroleum Institute)
standards in compliance with strict requirements that ensure reliab ility,

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
durability and safety of equipment in difficult operating conditions.
The main aspects of API design are: (API 610: Requirements for
centrifugal pumps with mechanical seals). API 685: Requirements for
hermetically sealed centrifugal pumps with magn etic drive and pumps
with shielded electric motor.
Classification: HE (Overhung), BB (Between Bearings) VS (Vertical
Suspended).
- The design of compressors conforming to API (American Petroleum
Institute) standards implies compliance with strict require ments for
design, materials, production, testing and operation of API 617
(centrifugal), API 618 (reciprocating) and API 619 (screw),
which also cover requirements for auxiliary equipment (lubrication
systems, seals and cooling systems).
- design and manuf acture of Mechanical seals for centrifugal pumps and
compressors according to API (American Petroleum Institute) with API
682 standard, aimed at ensuring reliable and safe operation of
equipment, preventing leakage of the working medium;
- Technical super vision of the installation of basic technological and
auxiliary equipment (ventilation, heating and air conditioning systems,
water supply and sewerage, heat supply) and pipelines, pumping and
compressor equipment (API 610, API -617, etc.),
metal structures in accordance with the requirements of the Building
Codes and Regulations of the Republic of Kazakhstan, the design and
quality of the work performed;
- Intermediate acceptance of equipment and visits to manufacturing
plants (Europe, Asia, USA) within the framework of the EPC contract.
January 2003 —
November 2003
11 months


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)
Senior machinist of the pumping and compressor equipment of the
catalytic reforming unit
- Maintenance and operation of technological pumping and compressor
equipment at storage and heat exchange units, hydrotreating and
octaning of raw materials, stabiliz ation and cooling of reformat with
withdrawal to storage parks;
– maintenance and operation of circulating turbo hydrogen centrifugal
and reciprocating compressors.
February 2001 —
January 2003
2 years


Atyrau Refinery
Atyrau
Oil and Gas
• Petrochemistry (Promotion, Wholesale)
• Oil Refining, Petrochemistry (Production)
• Fuels and Lubricants (Promotion, Wholesale)

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
Process pump operator of the catalytic reforming unit
- Maintenance and operation of process pumps of various types;
- Business activities in accordance with the rules and regulations of
occupational safety and health.
July 2000 —
October 2000
4 months


EmbaMunayGeofizika JSC

The handyman
The placement of seismic instruments at the Kenkiyak field and the
Zhana -Zhol gas processing plant in the Aktobe region under an EPC
contract.
July 1994 —
August 1995
1 year 2 months


Neftekhimremstroy JSC (SRSU -16)

A wide -profile carpenter
- Installation and dismantling of scaffolding;
- Thermal insulation of tank equipment and inter -shop technological
pipelines;
- Repair of process furnaces of the UZK, AVT -3, LG -35 -11/300, AT -2
installation, lining work of process furnaces of UPNK, LG, AVT -3, ELOU
AT -2 facilities of Atyrau Refinery;
- Landscaping (concrete works) of the plant territories;
- Plastering, painting and finishing works, bricklaying and many others.
Education
Higher
2024 Almaty Management University (AlmaU)
Management

2000

Atyrau Institute of Oil and Gas, Atyrau
Mechanical engineering, Offshore oil and gas facilities
Skills
Languages Kazakh — Native
English — A2 — Elementary
Russian — C2 — Proficiency
Skills Repair work Technical operation of equipment Repair of equipment Organization of safe operation
of equipment Purchase of equipment Modernization of production Installation of metal structures
Knowledge of metal properties Reading of drawings Control of equ ipment condition

Akhmetuly Bolatbek • Resume updated 19 July 2025 at 19:05
Commissioning of equipment Maintenance of equipment Commissioning of equipment
Commissioning of equipment Preparation of schedules Installation of equipment Development of
technical documentation Normative technical documentation Selection of equipment Lean
manufacturing Handling of technical documentation Performance of technical supervision
Production planning Preparation of documentation
Driving experience
Driver's license category B